Advertisement

Hampton Bay Lifetime Limited Warranty
The retailer warrants the fan motor to be free from defects in workmanship and material
present at time of shipment from the factory for a lifetime after the date of purchase by the
original purchaser. The retailer also warrants that all other fan parts, excluding any glass or
plexiglass blades, to be free from defects in workmanship and material at the time of
shipment from the factory for a period of one year after the date of purchase by the original
purchaser. We agree to correct such defects without charge or at our option replace with a
comparable or superior model if the product is returned to the retailer. To obtain warranty
service, you must present a copy of the receipt as proof of purchase. All costs of removing
and reinstalling the product are your responsibility. Damage to any part such as by accident
or misuse or improper installation or by affixing any accessories, is not covered by this
warranty. Because of varying climatic conditions in the United States this warranty does not
cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or
peeling. Brass finishes of this type give their longest useful life when protected from
varying weather conditions. A certain amount of wobble is normal and should not be
considered a defect. Servicing performed by unauthorized persons shall render the warranty
invalid. There is no other express warranty. The retailer hereby disclaims any and all
warranties, including but not limited to. Those of merchantability and fitness for a
particular purpose to the extent permitted by law. The duration of any implied warranty
which cannot be disclaimed is limited to the time period as specified in the express warranty.
Some states do not allow limitation on how long an implied warranty lasts, so the above
limitation may not apply to you.
consequential, or special damages arising out of or in connection with product use or
performance except as may otherwise be accorded by law. Some states do not allow the
exclusion of incidental or consequential damages, so the above exclusion or limitation may
not apply to you. This warranty gives specific legal rights, and you may also have other
rights which vary from state to state. This warranty supersedes all prior warranties.
The retailer shall not be liable for incidental,
Lifetime Limited Warranty
Date Purchased
Store Purchased
Model No.
Serial No.
Vendor No.
792145350644(326-722)
792145350651(326-946)
UPC
326-722
326-946
11289

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 326-722 and is the answer not in the manual?

Questions and answers

Summary of Contents for HAMPTON BAY 326-722

  • Page 1 Hampton Bay Lifetime Limited Warranty The retailer warrants the fan motor to be free from defects in workmanship and material Date Purchased present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser.
  • Page 2: Safety Rules

    1. To reduce the risk of electric shock, insure electricity has been turned Do not operate reversing switch while fan blades are in motion. Fan off at the circuit breaker or fuse box before beginning. must be turned off and blades stopped before reversing blade direction.
  • Page 3: Unpacking Your Fan

    12 c Unpack your fan and check the contents. You should have the following items: Set of blades (5) Light fixture 12. Loose parts bag containing: 2. Canopy assembly 8. Glass shade (3) a. Blade attachment hardware 3. Ball/downrod assembly 9.
  • Page 4: Tools Required

    Figure 4 Figure 2 To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar as shown in Figure 4 (available at your Hampton Bay Retailer). 3. Installing Your Fan...
  • Page 5: Hanging The Fan

    3. Pass the 120-volt supply wires through the center Hanging the Fan hole in the ceiling hanger bracket as shown in Fig.6 Ceiling REMEMBER to turn off th the power. Follow mounting 4. Loose the two screws on the outlet box in half the steps below to hang your fan properly.
  • Page 6 4. Pass the 120-volt supply wires through the center Pin in Motor wires locked hole in the ceiling hanger bracket as shown in Fig. position Ball/downrod assembly 5. Loose the two screws on the outlet box halfway. Ceiling Canopy canopy Bottom 6.
  • Page 7: Making The Electrical Connections

    Step 5 Turn the connecting nuts upward and push the wiring into the outlet box. Figure 10 and 11 illustrate the wiring connections for optional wall control (available at your Hampton Bay Retailer, the wire color out of wall control may vary, see wall control's WHITE BLUE installation manual for correct wire connections.)
  • Page 8 Finishing the SUPPLY CIRCUIT Installation Ground Conductor Light STANDARD CEILING INSTALLATION Slide canopy up to the ceiling as shown in Allow 1/8" Outlet Box Clearance Figure 12 leaving a 1/8" clearance Green between the canopy and the ceiling. Make Ground sure you place the wires safely into outlet Lead box.
  • Page 9: Attaching The Fan Blades

    Attaching the Fan Screws Blade Blades Rubber Step 1 Attach the blades to the blade brackets washers using the screws and rubber washers provided as shown in Figure 14. Start a screw into the Blade bracket bracket, but do not tighten. Repeat for the other Figure 14 2 screws and washers.
  • Page 10 All blades are grouped by weight. Because 3. Use the enclosed Blade Balancing Kit if natural woods very in density, the fan may the blade wobble is still noticeable. wobble even though the blades are weight Touching ceiling matched. 4. If the blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and The following procedure should correct most...
  • Page 11: Installing The Light Kit

    3. Tuck the wire harness into the switch box. REMEMBER to disconnect the power. The fan blades must already be attached to the fan 4. Remove the screws from the mounting ring under the fan motor. Raise the switch box to Your fan and light fixture, though pre- wired, have been disassembled at the the mounting ring until the holes in switch...
  • Page 12: Operating Your Fan

    Warm weather - (Forward) A downward NOTE air flow creates a cooling effect as shown WAIT FOR FAN TO STOP BEFORE in Figure 19. This allows you to set your CHANGING THE SETTING OF THE air conditioner on a higher setting without SLIDE SWITCH.
  • Page 13: Care Of Your Fan

    Here are some suggestions to help you 3. You can apply a light coat of maintain your fan furniture polish to the wood blades for additional protection and enhanced 1 . B e c a u s e o f t h e f a n ' s n a t u r a l beauty.
  • Page 14: Troubleshooting

    Problem Solution Fan will not start. 1.Check circuit fuses or breakers. 2. Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off. Fan sounds noisy. 1. Make sure all motor housing screws are snug. 2.
  • Page 15: Specifications

    These are approximate measures. They do not include Amps and Wattage used by the light kit. Distributed by Home Depot U.S.A., Inc. 2455 Paces Ferry Rd. N.W. Atlanta, Georgia 30339 2005 Homer TLC, Inc. All Rights Reserved Hampton Bay is a registered trademark of Homer TLC, Inc. Specifications 14.

This manual is also suitable for:

326-946792145350644792145350651

Table of Contents