Daytime Running Lamps; Adaptive Head Light; Switching Off - BMW 2006 M6 Owner's Manual

5. Select "Pathway lighting" and press the
controller.
6. Turn the controller to select the desired
duration.
7. Press the controller to apply the setting.

Daytime running lamps*

If desired, the light switch can remain in posi-
tion 0, 1 or 3.
In position 0 and 3 the exterior lighting is auto-
matically switched off after the vehicle is
switched off. In position 1 the parking lamps
light up after the ignition is switched off.
Switch on the parking lamps if required as
described under Parking lamps.

Adaptive Head Light*

The concept
Adaptive Head Light is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
Activating Adaptive Head Light
In switch position 3, the Adaptive Head Light is
active and the automatic headlamp control is
switched on, refer to page 80.
To avoid blinding oncoming traffic, the Adaptive
Head Light is not active when driving in reverse
and points toward the passenger side when the
vehicle is stopped.
Malfunction
The LED next to the symbol for automatic head-
lamp control flashes. The Adaptive Head Light
is malfunctioning or has failed. Have the system
checked as soon as possible.
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG
High beams/
roadside parking lamps
1 High beams
2 Headlamp flasher
3 Roadside parking lamps
Roadside parking lamps, left or right*
You also enjoy the option of lighting up just one
side of your vehicle when parking. When using
this function, comply with national regulations.
Switching on
After parking the vehicle, press the lever in the
desired direction 3, past the resistance point.
The roadside parking lamps drain the bat-
tery. Do not leave them switched on for
long periods of time, as otherwise it may no
longer be possible to start the

Switching off

Briefly press the lever in the opposite
direction 3 up to the resistance point.
High-beam assistant*
The concept
This system automatically switches the high
beams on and off again. A sensor on the front of
the interior rearview mirror controls the pro-
cess. The assistant ensures that the high
beams are switched on whenever the traffic sit-
uation allows. This reduces the strain on you
while at the same time providing you with the
best possible visibility. Of course, you can inter-
engine.<
81