BMW 2006 M6 Owner's Manual page 160

Calling
Dialing phone numbers
1. {Dial number}.
The dialog for establishing a telephone
connection is opened.
2. Say the phone number.
For telephone calls abroad, say {Plus}
and then the country code.
3. {Dial}.
The connection to the desired sub-
scriber is established.
Correcting phone number
After the last spoken sequence of digits has
been repeated by the system, you can delete
this sequence of digits.
{Correct number}.
The digits are deleted.
The command {Correct number} can be
repeated as often as you like.
Deleting input
{Delete} is used to delete all the digits entered
so far.
Voice phone book
Operating by voice command requires a per-
sonal voice phone book.
> On vehicles with separate drives for audio
CDs and navigation DVDs, the entries are
automatically adopted from your mobile
phone's memory.
> On vehicles with a single drive, the entries
must be entered by voice and are indepen-
dent of your mobile phone's memory. In this
case, it is not possible to use voice com-
mand either to call phone numbers stored in
the mobile phone or to store new numbers.
158
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG
Creating and editing voice phone
book*
Save entry:
An entry always consists of a name and phone
number.
{Save name}.
1.
The dialog for storing a name is
opened.
2. Speak name and repeat entry upon
request.
The spoken length of the names in the
phone book must not exceed approx.
2 seconds.
3. Say the phone number when prompted.
4. To store the phone number:
{Save}.
Delete entry:
You can delete any entry from the voice phone
book.
1. {Delete name}.
The dialog for deleting an entry is
opened.
2. Say the name when prompted.
3. Confirm the prompt with {Yes}.
Delete all entries:
{Delete phone book} deletes all entries in the
phone book.
1. {Delete phone book}.
The dialog for deleting phone book is
opened.
2. Confirm the prompt with {Yes}.
3. Confirm the repeated prompt with
{Yes}.
Have entries read aloud and dial:
You can have all the entries of your voice phone
book read aloud in the order of input and select
a certain entry to establish a connection:
1. {Read phone book}.
The dialog for reading phone book is
opened.
2. {Dial number} when the desired entry is
read aloud.