Refuel as soon as possible once your
cruising range falls below 30 miles/
50 km, otherwise engine functions are not
ensured and damage can
Average fuel consumption
The average fuel consumption is calculated for
the time during which the engine is running.
You can use the Control Display to view your
fuel consumption rate over two different dis-
tances, refer to Displays on Control Display or
Trip computer.
To reset the average fuel consumption: press
the BC button in the turn signal lever for approx.
2 seconds.
Displays on Control Display
You can also call up the computer via iDrive, for
explanation of principle, refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
Move the controller to the right to open
"Navigation".
Without navigation system
Data".
3.
Select "Car Data" and press the controller.
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG
occur.<
*
: open "Car
4.
Select "Onboard info" and press the con-
troller.
>
Estimated time of arrival at destination:
>
Entering a distance manually in the com-
puter, see below.
>
Entering a destination in the navigation
*
system
, refer to page 107.
>
Cruising range
>
Distance to destination:
>
Entering a distance manually in the com-
puter, see below.
>
Entering a destination in the navigation
*
system
, refer to page 107.
>
Average speed
>
Average fuel consumption
Periods with the vehicle parked and the engine
switched off are not included in the calculations
of average speed.
Resetting values
You can reset the values for average speed and
average fuel consumption:
1.
Select the desired menu item and press the
controller.
2.
Press the controller again to confirm.
61