Setting An Ip Address And Communication Speed; Obtaining An Ip Address Automatically (Dhcp); Setting An Ip Address Manually (Manual) - Sony FWD-42PX2 Operating Instructions Manual

Setting an IP address and communication speed

Setting an IP address and
communication speed
When an optional adaptor with network management
capability (such as BKM-FW32, BKM-FW50) is
installed in the OPTION1 slot of this unit, the display
can be controlled via a network. To use this
capability, set the IP address and communication
speed as follows.
Note
Setting of an IP address and a communication speed is
completed by selecting "Execute" and pressing ENTER.
When the setting is not completed properly, an error
code will be displayed. In such a situation, confirm
the setting values and set up again.
Obtaining an IP address
automatically (DHCP)
1
Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode: Standard
Adjust Picture
Adjust Sound
Select Set
ENTER
2
Select "INITIAL SETUP/INFORMATION" with
M/m and press ENTER.
The INITIAL SETUP/INFORMATION menu
appears on the screen.
INITIAL SETUP/INFORMATION
Language: English
Color System: Auto
Auto Shut Off: Off
Auto Screen Adjust: On
Information
IP Address Setup
Speed Setup
All Reset
Select Set
ENTER
42
(GB)
Exit
MENU
Exit
MENU
3
Select "IP Address Setup" with M/m and press
ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
IP Address Setup
DHCP
Manual
Select Set
ENTER
4
Select "DHCP" with M/m and press ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
IP Address Setup
DHCP Cancel
Manual Execute
Select Set
ENTER
5
Select "Execute" with M/m and press ENTER.
An IP address is automatically obtained.
Setting an IP address manually
(Manual)
1
Select "Manual" in step 4 of "Obtaining an IP
address automatically (DHCP)" and press
ENTER.
The following menu appears on the screen.
INITIAL SETUP/INFORMATION
IP Address Setup
Manual
IP Address: 000 . 000 . 000 . 000
Subnet Mask: 000 . 000 . 000 . 000
Gateway Address: 000 . 000 . 000 . 000
Primay DNS: 000 . 000 . 000 . 000
Secondary DNS: 000 . 000 . 000 . 000
Execute
Select Set
ENTER
2
Select an item to be set manually with M/m and
press ENTER.
INITIAL SETUP/INFORMATION
IP Address Setup
Manual
IP Address: 000 . 000 . 000 . 000 000 . 000 . 000 . 000
Subnet Mask: 000 . 000 . 000 . 000
Gateway Address: 000 . 000 . 000 . 000
Primay DNS: 000 . 000 . 000 . 000
Secondary DNS: 000 . 000 . 000 . 000
Execute
Select Set
ENTER
3
Set the three digit value (0 to 255) for the first box
with M/m on the display unit or numeric keys on
the Remote Commander and press ENTER or ,.
The cursor moves to the next box.
Exit
MENU
Exit
MENU
Exit
MENU
Exit
MENU