Ip Control - Sony FW-75EZ20L Reference Manual

(b) Responses from the LCD Monitor to the controller
No. Item
1 Header
2 Answer
3 Check Sum
Command example
Examples of RS-232C communication command are explained below.
Control Head
Power on/
0x8C
off
HDMI input
0x8C
selection
For more details on RS-232C, please contact your sales representative.

IP control

You can control the LCD Monitor via IP from an HTML5/Android application on the external device. You
can manage and monitor information of input/power, control the LCD Monitor such as input source
and volume.
Supported IP protocol
Protocol name Layer
Simple IP control TCP
LCD Monitor settings
When using [IP control], set the LCD Monitor as follows first.
Go to [Settings] t [Network and Internet] t [IP control].
For Simple IP control,
• Enable [Simple IP control].
For more details on [IP control], please contact your sales representative.
Value
0x70
0x00
0x01
0x02
0x03
0x04
0xXX
Category Function
0x00 0x00
0x00 0x02
Format Authentication
Byte stream N/A
Answer
Completed (Normal End)
: Limit Over
(Abnormal End-Exceed maximum value)
: Limit Over
(Abnormal End-Exceed minimum value)
: Command Canceled (Abnormal end)
: Parse Error (Data Format Error)
Length Data 1
0x00 (off)
0x02
0x01 (on)
0x04
0x03
(HDMI)
Explanation
Only typical functions are
supported.
Data X Checksum
- 0x8E
- 0x8F
0x01 (#1) 0x96
0x02 (#2) 0x97
0x03 (#3) 0x98
0x04 (#4) 0x99
11
EN
EN GB