Deflating With The Low Pressure Hose; Inflating Manually For High And Low Pressure Applications; Accessories - Westfalia ALK 18 Original Instructions Manual

 Set the main switch (3) to low pressure (I) to start inflating.
 When the desired pressure is reached set the main switch to O and
close the valve of the item inflated.
 Remove the hose by turning it counter clockwise as far as it will turn
and removing it from the inflation flange.
 Store the hose in hose wrap on the left side of the compressor.
Note: Always leave low pressure hose free of obstructions and with
pinch valve adaptor off when not in use. Overheating could occur if the
low pressure hose ls blocked.

Deflating with the low Pressure Hose

The low pressure hose, when placed ln the deflation flange (6), can be
used to remove air from inflated items.
 Place the hose inside the deflation flange (6).
 Set the main switch to low pressure (I) to start deflating.
 When the item has been deflated, turn the main switch to O.
 Remove the hose by pulling if from the deflation flange.
 Store the hose in hose wrap on the left side of the compressor.

Inflating manually for high and low Pressure Applications

 Connect either high or low pressure hose to the compressor and to
the item to be inflated.
 Set the main switch to I or II (low or high pressure) until desired
pressure is reached.
Note: Stand half a metre away from item being inflated.
 Set the main switch to O.

Accessories

The supplied accessories perform a variety of functions.
The tapered adaptor can be used on smaller pinch valves to inflate
items like floats and children's toys, which usually require the user to
inflate them by blowing air into item. The sport ball needle can be used
to inflate any type of sports ball or any other item that requires an
inflation sport ball needle.
Operation
21