Bosch Rexroth A10VER 52 Series Instruction Manual page 35

Fig. 10: Port overview A10VER, EZx control, SAE flange port (port plate 10)
Table 10: A10VM/A10VER ports Series 52
Ports
A
B
l
1)
2)
O = Must be connected (plugged on delivery)
X = Plugged (in normal operation)
Tightening torques The following tightening torques apply:
• Fittings:
• Female threads in the axial piston unit:
• Threaded plugs:
• Mounting bolts:
1)
Working port (high-pressure series)
Working port (high-pressure series)
Drain port
The measuring system and thread size can be taken from the installation drawing.
Depending on the application, short-term pressure peaks can occur. Keep this in mind when
selecting measuring equipment and fittings.
Observe the manufacturer's specifications regarding the tightening torques of the
used fittings.
The maximum permissible tightening torques M
female threads and must not be exceeded. For values, see Table 11.
For the metallic threaded plugs supplied with the axial piston unit, the required
tightening torques of threaded plugs M
For mounting bolts with metric ISO thread according to DIN 13 or thread according
to ASME B1.1, we recommend checking the tightening torque in individual cases in
accordance with VDI 2230.
A
B
are maximum values of the
G max
apply. For values, see Table 11.
V
RE 91706-01-B/09.2015, A10VER Series 52, Bosch Rexroth AG
Installation 35/56
L
Status
p [bar]
2)
max
10 O
350 O
2 O