Advertisement
Quick Links
EVM970LIM
Package Contents
EVM970L series
Push-button mechanism
■
1 x Push-button mechanism
■
1 x Pack of buttons (Red or Blue lens) and rings
■
Instruction Sheet
Technical specifications
Nominal Input Voltage
Rating (Fluorescent/Incandescent)
Rating (LED)
Switch type
Terminals
Important Information
■ This product must be installed and used as per these instructions.
■ This product must be installed by a licensed electrician or similarly qualified person.
■ V90-rated building wire must be used when wiring this product.
■ This product has been designed with limited short circuit protection.
■ Repeated short circuits may still damage the product.
■ Severe electromagnetic interference from other products may cause malfunction of this product.
■ This product should only be cleaned with a damp cloth. Cleaning agents and solvents should not be used.
■ This product contains no serviceable parts and no attempt should be made to repair this product. If the product
is faulty it should be discarded.
■ Legrand reserves the right to modify the specifications of this product at anytime.
EV970L
EV970L series
■
■
■
Button
Ring
EV970L / EVM970L
EVM970LIM
250 V a.c.
10 AX
10 AX
100 W
2-way
Intermediate
2 x 1.5 mm
EVM970L / EVM970LIM / EVM970LBP/ EV970L Series
1 x EVM970L push-button mechanism (see opposite for content)
1 x Grid and Plate
Instruction Sheet
EVM970L
EVM970LBP
10 A
-
Momentary
or 1 x 2.5 mm
2
2
Vivo
MECHANICAL PUSH-BUTTON
Instruction Sheet
EVM970L / EVM970LBP
Grid
Plate
TM
Advertisement
Related Manuals for LEGRAND HPM Vivo EVM970L Series
Summary of Contents for LEGRAND HPM Vivo EVM970L Series
- Page 1 ■ This product contains no serviceable parts and no attempt should be made to repair this product. If the product is faulty it should be discarded. ■ Legrand reserves the right to modify the specifications of this product at anytime.
- Page 2 Installation (EVM970L series (Note: Laser marking is done on front of mechanism for guidance) 1. Pick the button with the desired coloured LED lens: Red or Blue 2. Check the wall plate orientation: Vertical or Horizontal. See fig. D. and press firmly 3.
- Page 3 Wiring One way switching EVM970L LOAD LED Indicator always ON Active and Neutral at Switch EVM970L LOAD LED Indicator ON when Load is ON Active and Neutral at Switch EVM970L LOAD LED Indicator ON when Load OFF (High impedance Load) Active and Neutral at Switch EVM970L LOAD...
- Page 4 Customer Service For all Customer Service and Technical Support Legrand will honour all statutory guarantees that you as a consumer are please call Monday to Friday during business hours. entitled to rely upon under the Australian and New Zealand Consumer...