LEGRAND HPM Vivo EVM970L Series Instruction Sheet page 2

Installation (EVM970L series
)
(Note: Laser marking is done on front of mechanism for guidance)
1. Pick the button with the desired coloured LED lens: Red or Blue
2. Check the wall plate orientation: Vertical or Horizontal. See fig. D.
and press firmly
3. Clip the button on the mechanism. See fig. A and B.
4. Clip the ring.See fig. C.
5. Clip the assembly into the grid and proceed to wiring (Refer to wiring section below).
Horizontal Plate
A B
D
C
CLICK
Vertical Plate
B
A
D
C
CLICK