Connecting To Plc - NBK EPC-200-CC Instruction Manual

4
Installation and Connections
Connecting the Power Supply/Wired Units Connection Connector to Lead Wire
① Lead wire
② Orange button
4.3.3

Connecting to PLC

CC-Link connection connector
Specifications
Connector Pinout
10mm
(0.394 in.)
20
1
Remove 10 mm (0.394 in.) of
insulation coating from the ① Lead
wire.
2
While pressing the ② Orange
button with a precision flathead
screwdriver, insert the lead wire.
After the lead wire is inserted, release
the button to secure the wire.
Manufacturer
Model
Number of pins
Compatible wire
gauge
Signal name
DA
DB
DG
SLD
FG
PHOENIX CONTACT
TFKC 2,5 / 5-STF-5,08
5
AWG12-26
Description
CC-Link communication signal
CC-Link communication signal
CC-Link digital GND
CC-Link shield
Frame GND