Overview; Product Overview - NBK EPC-200-CC Instruction Manual

2

Overview

2.1 Product Overview

EPC-200-CC is a remote device station equipment that supports CC-Link Ver. 2.00.
Please note that CC-Link Ver. 1.10 is not supported.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. This is an open
network for industrial use that enables communication between devices of many different
manufacturers.
Connection Example
PC equipment
USB cable connection
PLC
Transceivers - CC-Link Compliant (EPC-200-CC)
・ A dedicated transceiver for use with a wireless positioning unit.
・ Connectable to a PLC using the CC-Link protocol.
・ Able to automatically and collectively control up to 32 wireless
positioning units.
・ The transceiver settings can be easily configured using a PC with
the dedicated software (EPU-COM).
・ The DIN rail foot allows it to be easily attached to a DIN rail in a
single step.
EPU-COM
* Used for initial settings and controlling
the product from a PC.
Transceiver
EPC-200-CC
RS-485 cable (2-wire type)
9
Wireless connection
(2.4 GHz)
Units
EPU-220
EPU-100
Wired connection
Units
EPU-220
Allows up to 32 connections