Transceiver Installation; Mounting On Din Rail - NBK EPC-200-CC Instruction Manual

4
Installation and Connections

4.2 Transceiver Installation

4.2.1

Mounting on DIN Rail

DIN Rail Mounting
② Upper tab
① DIN rail
③DIN rail foot
Removal from DIN Rail
① DIN rail
① DIN rail foot
① DIN rail foot
16
1
Hook the transceiver's ② Upper tab
onto the top of the ① DIN rail (width
35 mm (1.378 in.)).
2
Press the ③ DIN rail foot against the
DIN rail until it clicks.
1
Use a tool such as a flathead
screwdriver to pull down the ① DIN rail
foot.
2
Lift up the transceiver and remove it.
It can also be removed by sliding it
along the DIN rail.