Directions For Use; Troubleshooting; Spare Parts - Martellato LAMP01 Use And Maintenance

Screw the M5 knob on the back
of the steel tube.
Vertical adjustment by sliding the lamp guard
on the tube
22
The knob ensures that the lamp body cannot
accidentally slide off the support.
40°
Lamp guard tilt adjustment up to 40° towards
the operator.
DPLLAMP01 - ENGLISH

6.1 DIRECTIONS FOR USE

Make sure assembly is correct.
Connect the power cord to a 230 V
and 30 mA differential protection connections are fully functional and efficient.

7.0 TROUBLESHOOTING

FAULT POSSIBLE CAUSE
A The lamp connected to The switch is in position
the power socket does 0 or off.
not turn on.
B The lamp connected to The infrared tubes may
the socket with switch on be damaged.
does not heat.
C The lamp with switch in One infrared tube
position (2) only heats damaged.
with one tube

7.1 SPARE PARTS

For electrical or mechanical spare parts, contact the Martellato sales force
or your dealer.
socket making sure grounding
AC
REMEDY
Check the switch posi-
tion.
Contact Martellato
customer service.
Contact Martellato
customer service.
DPLLAMP01 - ENGLISH
23