Bunn MY CAFE P2896 Use And Care Manual page 17

SITUATION
The REFILL WATER
INDICATOR has come on.
The POD HOLDER INDICATOR
has come on.
The water shuts off and comes
back on again when brewing.
EXPLANATION
The WATER RESERVOIR has run low on water.
Slide the lid open and pour additional water
into the reservoir, or remove the reservoir
and fill it at a sink, or other water source.
CAUTION: Do not place the brewer in a sink
or other water source. Do not fill past the
Maximum fill line.
The POD HOLDER is missing.
Place the pod holder into the machine and
press it firmly into place.
The POD HOLDER is not locked in place.
Carefully remove and re-insert the pod
holder into the machine while listening
for a clicking sound. The POD HOLDER
INDICATOR on the control panel should go
out.
The TEA BREW BUTTON has been pressed
to start the brew cycle.
Do NOT press the TEA BREW or COFFEE
BREW button during the brew cycle. This
will stop the brew cycle. The brewer is
using a Pulse Brew
properly. The water will shut off and turn on
again. This is normal and will take about 45
seconds to complete. Wait for the blue lights
to go out.
NOTE: Although the pulse brew process can
be used for coffee or tea, it is designed to
brew tea. Because the process of brewing
tea is different than coffee, the brewer works
differently when the TEA BREW BUTTON is
used. An "On-Off-On" cycle is used to steep
the tea and provide the maximum flavor
extraction. The action is a cycling of the water
flow, causing the water to go off and come
back on. This is normal.
17
technology to steep tea
™