Table of Contents
Advertisement
7835
Hydrazine Monitor
1.10 Safety Recommendations
For safe operation, it is imperative that these service instructions
be read before use and that the safety recommendations
mentioned herein be scrupulously respected. If danger warnings
are not heeded to, serious material or bodily injury could occur.
Warning. The installation of the instrument should be
performed exclusively by personnel specialized and
authorized to work on electrical installations, in accordance
with relevant local regulations.
Caution. This equipment has been tested and found to
comply with the limits for Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used
in accordance with this instruction manual, may cause
harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful
interference in which case the user is required to correct the
interference at his own expense.
1.11 Service and Repairs
Other than the serviceable items listed in Section 10, page 27,
none of the instrument's components can be serviced by the
user. Only personnel from ABB or its approved representative(s)
is (are) authorized to attempt repairs to the system and only
components formally approved by the manufacturer should be
used. Any attempt at repairing the instrument in contravention of
these principles could cause damage to the instrument and
corporal injury to the person carrying out the repair. It renders
the warranty null and void and could compromise the correct
working of the instrument and the electrical integrity or the CE
compliance of the instrument.
If you have any problems with installation, starting, or using the
instrument please contact the company that sold it to you. If this
is not possible, or if the results of this approach are not
satisfactory, please contact the manufacturer's Customer
Service
1.12 Potential Safety Hazards
The following potential safety hazards are associated with
operating the analyzer:
Electrical (line voltage)
Potentially hazardous chemicals
4
1 Safety
IM/7835–EN Rev. P
Advertisement
Table of Contents
