Bunn LCC-2 LP Installation And Operating Manual page 15

PROGRAMMING THE DISPENSER (Cont.)
Program Mode (Continued)
LCD DISPLAY
P 7
MENU (-)
P 8 6 0 0
MENU (-)
P 9 O
MENU (-)
L C 0
MENU (-)
Program Lockout Function:
onds while machine is in program mode. At 10 seconds, the machine's display changes from "PPP" to "PP LOC"
indicating the locked position. At this point, the operator may view the setup functions, but not alter any of the
parameters. In order to unlock the machine, repeat the aforementioned process. A MemoryLocked flag is set in
eeprom so that the machine will retain this setting if power is lost.
LCD DISPLAY
P P LOC
MENU (-)
PROGRAM MODE
Right (Decaf) Dispense Total
0. 0
(+)
Empty Product Threshold
(+)
Rinse Alarm Timer
F F
(+)
x x
(+)
The operator must hold down the stop and portion control button for 10 sec-
PROGRAM FUNCTION
Function Lockout Feature
(+)
DESCRIPTION
Reset Total to Zero (00.0 Gal)
Set Conductance Threshold
Default = 600
Range = 100 Min / 900 Max
To check Conductance of Hot Water,
view the display while rinsing. Set value
to 100 above reading.
Default = OFF > Rinse Alarm Disabled
Range = 1 - 24 hrs
Reminder Only. No Lock Out.
To clear alarm, set to RINSE Mode.
Press Left switch, then Right switch
for 15 seconds each.
Displays Software Version # -
Exits To Home View After 3 Seconds.
DESCRIPTION
Prevents the user from changing set-up
functions
15
(0.00 Liters)
39288 070109