Husqvarna FC 450 2021 Owner's Manual page 71

SERVICE WORK ON THE CHASSIS 11
–
Position the link fork and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, fork pivot
V01318-10
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
S01921-10
(All FC models)
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
K01098-01
Remaining screws,
chassis
(FX 450)
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
V01351-10
Remaining screws,
chassis
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
S01927-10
A
.
2
.
M16x1.5 100 Nm (73.8 lbf ft)
3
.
4
engages in the foot brake cylinder.
5
.
M6 10 Nm (7.4 lbf ft)
4
engages in the foot brake cylinder.
5
.
M6 10 Nm (7.4 lbf ft)
6
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
69