11 SERVICE WORK ON THE CHASSIS
62
–
Position the fork legs.
Air bleeder screw
tioned to the front.
Valve
Info
Grooves are milled into the side of the upper end
of the fork legs. The second milled groove (from
the top) must be flush with the upper edge of the
H01182-11
upper triple clamp.
The air suspension is located in the left fork leg.
The pressure and rebound damping is located in
the right fork leg.
–
Tighten screws
Guideline
Screw, bottom
triple clamp
A00514-10
–
Tighten screw
Guideline
Screw, top steering
head
A00510-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
A00510-11
–
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Secure the wiring harness with cable holder
left.
A00509-11
5
of the right fork leg is posi-
A
of the left fork leg faces the front.
6
.
M8
4
.
M20x1.5
7
.
M8
20 Nm (14.8 lbf ft)
8
.
M8
12 Nm (8.9 lbf ft)
12 Nm (8.9 lbf ft)
®
Loctite
243™
17 Nm (12.5 lbf ft)
9
on the