2.2 Installation - ProArc PT-103 Owner's Manual

2.2 INSTALLATION

 Power cord. Connect the power cord to 1 phase 100V~240VAC
Note：The standard power connector is NEMA-5-15P, different region may select different power
connector.
NEMA-5-15P(Standard)
 Grounding Stud
To avoid potential electrical damage, please connect the grounding stud to actual ground.
 Tilt Lock / Release Handle
Clockwise rotation to lock, counter clockwise rotation to release
Danger! Do not release the tilt handle when part is loaded on the faceplate.

(PSW) Power Switch
I = On，O = Off

LED Indicator Color Identification.
Green：Standby.
Red：Stop button activated.
White：Auto-procedure in progress.
Flashing Green：Homing sequence in progress. (CB-102 only)
Flash Red：Overload.

Forward / Reverse Switch (SW1)
Faceplate rotation direction.
CW ( ) / CCW (
Reverse
European Adapter(Option)
)
Forward
4
Australian Adapter(Option)