6. AIR CIRCUIT MAINTENANCE ......... p.13 6.1. Every 500 working hours ..........p.13 6.2. Every 2000 working hours ........p.13 7. MOTOR MAINTENANCE ..........p.13 8. DECLARATION OF CONFORMITY ........p.14 9. WARRANTY CONDITIONS ..........p.15 User manual - EUROPRO 150TH-V 202011-499A-ENG...
- people in charge of the transport of the machine - people in charge of the use of the machine - people in charge of the cleaning and maintenance of the machine - people in charge of the final destruction of the machine 202011-499A-ENG User manual - EUROPRO 150TH-V...
• In case of needed After-Sale Service, always specify the machine model and its serial number. • For any replacement of parts, only use genuine parts. • Do not modify the machine. • Do not cut or dismantle the protection grids. User manual - EUROPRO 150TH-V 202011-499A-ENG...
Page 5
In case of contact with eyes, rinse Contains sulphuric acid. immediately. Risk of chemical skin burns and corrosion. Consult an ophthalmologist. IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL MODIFICATION WITHOUT ADVANCED NOTICE. 202011-499A-ENG User manual - EUROPRO 150TH-V...
3. YOUR MACHINE 3.1. DESCRIPTION EUROPRO 150TH-V is a powerful screw compressor designed for intensive use on all types of jobs. Equipped with a petrol engine, it operates with unleaded fuel. Its ergonomic design, its 4 folding arms and its 4 slinging points make it a practical compressor to use and transport, without removing anything of its power.
3. YOUR MACHINE (continued) 3.3. IDENTIFICATION OF THE COMPONENTS Compression head Air filter Oil tank cap for compression head Oil level eye for compression head Tank pressure manometer Fuel tank Air outlet connections Engine Slinging points User manual - EUROPRO 150TH-V 202011-499A-ENG...
Page 9
3. YOUR MACHINE (continued) 3.3. IDENTIFICATION OF THE COMPONENTS (continued) Starter Launcher Engine start key Engine oil level gauge Engine oil filling cap Engine accelerator 202011-499A-ENG User manual - EUROPRO 150TH-V...
3. YOUR MACHINE (continued) 3.4. COMPRESSOR HANDLING, DOCKING AND LIFTING Lifting points Docking points TABLE DE REVISIONS A REMPLIR AU DOS User manual - EUROPRO 150TH-V 202011-499A-ENG...
4.3. STOPPING OF THE COMPRESSOR Close the valve (G) and drain the air in the hose. Disconnect the equipment connected to the compressor. Turn the key (L) to the OFF position to switch off the compressor. 202011-499A-ENG User manual - EUROPRO 150TH-V...
In case of an unknown defect or a doubt on the good running of the machine, do not try to repair it by yourself or to dismantle it. Contact an authorized After-Sale Service or our hotline : +33 4 42 29 08 96. User manual - EUROPRO 150TH-V 202011-499A-ENG...
Used oil must not be discharged into the environment or sewers, but to a specialised waste disposal service. If the compressor is used intensively, repeat these operations more frequently. 7. MOTOR MAINTENANCE For maintenance of the thermal engine, refer to Vanguard’s recommendations in the booklet supplied with the machine. 202011-499A-ENG User manual - EUROPRO 150TH-V...
Any action of the customer against us relating to the guarantee of the equipments will be prescribed within the period of 1 year as from the day of the discovery of the defect. It is up to the customer to prove the day of this discovery. 202011-499A-ENG User manual - EUROPRO 150TH-V...
Page 16
EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET - Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36 SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510 More information on www.euromair.com User manual - EUROPRO 150TH-V 202011-499A-ENG...
Need help?
Do you have a question about the 150TH-V and is the answer not in the manual?
Questions and answers