1. INTRODUCTION You just acquired an EUROPRO 4P sprayer and all the team of Europe Projection thanks you for the confidence you have granted us. Manufacturer of professional equipments for paint and fillers, we have put our know-how for 20 years at the service of the users of our machines.
- people in charge of the transport of the machine - people in charge of the use of the machine - people in charge of the cleaning and maintenance of the machine - people in charge of the final destruction of the machine 201409-078B-ENG User manual - EUROPRO 4P...
After-Sale Service to put genuine parts instead of the defective ones. • In case of needed After-Sale Service, always specify the machine model and its serial number. • For any replacement of parts, only use genuine parts. User manual - EUROPRO 4P 201409-078B-ENG...
Page 7
After every use, necessarily grease the pump with a mixture of water + storage liquid to avoid it blocking up. The storage of a not greased pump can damage it seriously. IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL MODIFICATION WITHOUT ADVANCED NOTICE. 201409-078B-ENG User manual - EUROPRO 4P...
Antony (92) or Rousset sur Arc (13). Upon receipt, the products are sorted by our employees and directed to the most appropriate processing channels. For any further information, please contact our hotline to conseil@euromair.com or 04 42 29 08 96. User manual - EUROPRO 4P 201409-078B-ENG...
- a Ø19 x 5 m hose - a toolkit containing : • an ABS spray lance Delivered with • two nozzles n°4 and 5 • two cleaning balls and a tube brush • a 7mm Allen key 201409-078B-ENG User manual - EUROPRO 4P...
4.3. IDENTIFICATION OF THE COMPONENTS OF THE MACHINE ON/OFF button Potentiometer "Manu-Auto" button Emergency stop button Air inlet quick-connector Nozzle Lance Rotor / Stator Drain valve The complete list of the machine components is available on our website www.euromair.com User manual - EUROPRO 4P 201409-078B-ENG...
High product flow-rate (to set from 1 to 10 with the potentiometer (B)). Low air pressure (to set from 0 to 8 with the air regulator of the compressor). Thin grain Low product flow-rate. High air pressure. 201409-078B-ENG User manual - EUROPRO 4P...
13. Disconnect the machine from the power supply. The direct projection of water under pressure onto the control panel has to stopped at the risk of water infiltration into the electric box. Proceed by simply cleaning with a humid sponge. User manual - EUROPRO 4P 201409-078B-ENG...
In case of an unknown defect or a doubt on the good running of the machine, do not try to repair it by yourself or to dismantle it. Contact an authorized After-Sale Service or our hotline : +33(0) 4 42 29 08 96. 201409-078B-ENG User manual - EUROPRO 4P...
Page 14
User manual - EUROPRO 4P 201409-078B-ENG...
This is the only valid warranty recognized by the manufacturer. No one is allowed to deliver another one, oral or written, or modify its terms. All our terms of sales and shipping are available on our general catalogue of the ongoing year and also on our website www.euromair.com. 201409-078B-ENG User manual - EUROPRO 4P...
Page 18
User manual - EUROPRO 4P 201409-078B-ENG...
Page 19
The guarantee does not cover parts which, because of their specific use, are subject to wear and tear. If the identified defects could not be attributed to our liability, costs will be charged to the buyer. MODEL : EUROPRO 4P sprayer SERIAL NUMBER :...
Page 20
Tél : 00 33 (0)4 42 29 08 96 – Fax : 00 33 (0)4 42 53 44 36 SAS au capital de 400 000€ - SIREN 394 961 510 – NAF 2892 Z User manual - EUROPRO 4P 201409-078B-ENG...
Need help?
Do you have a question about the 4P and is the answer not in the manual?
Questions and answers