Introduction; Overview - Netafim TECHLINE AS Design Manual

T E C H L I N E A S ™ D E S I G N G U I D E

INTRODUCTION:

This manual has been prepared to assist with the correct use of Techline AS™ for irrigation
projects that are either On-Surface Drip Irrigation (OSDI) for garden areas or Sub-surface Drip
Irrigation (SDI) for turf areas. Included are design steps, technical data, design layouts, as well
as some design installation details and check list using both "Grid" and "Basic" layout methods.

OVERVIEW:


Netafim is the world leader in low volume irrigation. Since the early 1960's Netafim has
pioneered the science of sub-surface and point source irrigation manufacturing.

Serving more than 100 countries worldwide, Netafim products are sold into the
Landscape & Turf market, as well as Agriculture, Green-House, Nursery, Waste Water
re-use, Mining and Forestry markets.

The Techline family of dripperline products has been used successfully in Landscape
since 1987. The recent addition of Techline AS™ has guaranteed that it will continue to
perform reliably and successfully in this market.

Landscape Architects, Contractors, Nurserymen, Designers and Consultants recognize
the benefits of using low volume drip irrigation for new plantings because of its
accelerated plant growth compared to overhead spray or rotor irrigation. Coupling rapid
growth with dramatic water savings and low volume irrigation becomes an important
part of any Landscape project.

With the flexibility and quality of Netafim products, Architects, Designers and
Contractors have highly sophisticated solutions to client and installation issues by
bringing drip and sub-surface components together to grow plants, trees, shrubs,
groundcover, ornamental grasses and turf.
NETAFIM @BCL@C40BDC65.doc 4
21/12/2009