Sony MZ-DH10P Operating Instructions Manual page 62

On the earphones
Road safety
Do not use earphones while driving, cycling,
or operating any motorized vehicle. It may
create a traffic hazard and is illegal in many
areas. It can also be potentially dangerous
to play your player at high volume while
walking, especially at pedestrian crossings.
You should exercise extreme caution or
discontinue use in potentially hazardous
situations.
Preventing hearing damage
Avoid using earphones at high volume.
Hearing experts advise against continuous,
loud and extended play. If you experience a
ringing in your ears, reduce the volume or
discontinue use.
Caring for others
Keep the volume at a moderate level. This
will allow you to hear outside sounds and to
be considerate of the people around you.
On the remote control
The supplied remote control is designed for
use with this player only. The player cannot
be operated with a remote control that was
supplied with another device.
62
On the LCD screen and
lens
• The LCD screen is manufactured using
extremely high-precision technology so
over 99.99% of the pixels are operational
for effective use. However, there may be
some tiny black points and/or bright points
(white, red, blue or green in color) that
constantly appear on the LCD screen. These
points are normal in the manufacturing
process and do not affect the recording in
any way.
• Be careful when placing the player near a
window or outdoors. Exposing the LCD
screen or the lens to direct sunlight for long
periods may cause malfunctions.
• The image pickup device of the camera uses
very sophisticated technology; however,
bright or dark dots and lines may appear in
the LCD screen. Also, when shooting under
low-light conditions, white lines or "noise"
may appear in the LCD screen. These dots
and lines are normal and are not a problem
of the camera.
On cleaning
• Clean the player casing and the screen
surface with a soft cloth slightly moistened
with water or a mild detergent solution.
Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol
or benzene as it may mar the finish of the
casing.
• Clean the lens with a soft cloth. Do not use
any type of abrasive pad, scouring powder
or solvent such as alcohol or benzene as it
may mar the lens.
• Wipe the disc cartridge with a dry cloth to
remove dirt.