Messages - Sony MZ-DH10P Operating Instructions Manual

Messages

Message
AUDIO DISC
FOR PLAYBACK
ONLY
AUDIO FILE
ERROR
AVLS ON
NO VOLUME
OPERATION
BLANKDISC
BUSY
WAIT
A MOMENT
CANNOT PLAY
CHARGE
+5° C–+35° C
41F–95F
CLOSE
LENS COVER
DC IN
TOO HIGH
DISC FULL
END
FOLDER FULL
FOLDER
NO EXPAND
FORMAT
ERROR DISC
HOLD
58
Case and/or corrective action
 You tried to shoot still images in a disc that can only play music
tracks.
 There is no audio data that can be played on the player. The
audio data or disc management file has been damaged.
 "AVLS" is set to "On" and so the volume cannot rise higher.
Set to "Off" (  page 37).
 A disc with no recording on it is inserted.
 The player is accessing disc information. You tried to operate
the player while it was accessing the recorded data. Wait until
the message goes out (in rare cases, it may take a few minutes).
 There is no audio data that can be played on the player. The
audio data or disc management file has been damaged.
 You tried to play an MP3 audio track that the player cannot
play. Playable MP3 file format are those: transferred using
the SonicStage software/MPEG-1 Audio Layer-3/sampling
frequency of 44.1kHz.
 You tried to charge the rechargeable battery at a place with a
temperature outside the specified range for the player. Charge
the battery at a temperature of +5° C (+41° F) to +35° C (+95°
F).
 You removed the disc while the system file was being rewritten
after you shot a still image. Press
 Voltage of the power supply is too high (The supplied AC
power adaptor or the recommended car battery cord is not
used). Use the supplied AC power adaptor or the recommended
car battery cord.
 You tried to shoot still images using a disc that does not have
enough storage space.
 The player reached to the end of the disc while playing or
pushing the 5-way control key toward  (press and hold
 on the remote).

The folder capacity is reached.
 If the number of folder directories is more than 16, you cannot
view the JPEG files on the player.
 A disc with a format that the player does not support was
inserted. Insert a standard MD or a disc used in Hi-MD mode.
 A disc formatted on the computer was inserted. When
formatting a disc on the computer, make sure to use the
SonicStage software.
 The player is locked. Slide HOLD against the arrow to unlock
the player (  page 13).
/ .