Sony MZ-DH10P Operating Instructions Manual page 48

3
Place the player on the USB cradle
and push it in firmly.
The OPR lamp lights up in orange.
You can connect the dedicated USB cable
directly to the player.
To disconnect the dedicated USB cable
from the USB cradle or the player
1 Make sure that the OPR lamp on the
player is not flashing rapidly.
2 Press 
(stop) on the player.
Make sure that the OPR lamp on the
player is not flashing rapidly again.
48
3 Disconnect the dedicated USB cable.
While pressing the buttons on the sides of
the plug, push the plug inward, and then
pull it outward to disconnect the dedicated
USB cable from the player.
To remove the player from the USB cradle
1 Follow steps 1 and 2 of "To disconnect the
dedicated USB cable from the USB cradle
or the player" (

2 Press RELEASE on the USB cradle to
remove the player (
When removing the disc from the player
1 Follow steps 1 and 2 of "To disconnect the
dedicated USB cable from the USB cradle
or the player" (

2 Remove the disc from the player.
page 48).
page 15).

page 48).