Sony WHG-SLK1i Operating Instructions Manual page 66

 Supported file formats are as follows:
 MP3: file extension ".mp3"
 WMA: file extension ".wma"
 AAC: file extension ".m4a"
 MPEG4: file extension ".mp4" or ".avi"
 MPEG2/MPEG1: file extension ".mpg" or
".avi"
 Motion JPEG: file extension ".avi"
 JPEG: file extension ".jpg" or ".jpeg"
Note that even when file names have the
above file extensions, if the actual files
differ, the system cannot play those files, or
playback problems occur even if you could
play files. Especially, such audio files and
audio data in video files may generate a
loud noise which could damage the speaker
system and the system may malfunction.
 The following situations can increase the
time it takes to start playback:
 files and folders recorded on the USB
device or memory card with a complicated
tree structure.
 when the files in another folder have just
been played back.
 when you play back AAC files.
 Playback of MP3 files may take time
depending on the encoding software used to
create the MP3 files.
 The system can play back to a depth of
8 folders only.
 Resume play back is cancelled when you
change the function.
 The system does not necessarily support all
the functions of USB device or memory card.
 The playback order of files and folders for the
system may differ from the original order of
their creation on the USB device or memory
card.
 Folders that have no MP3/WMA/AAC audio
files, video files, JPEG image files are skipped
during playback.

GB
To select the memory on the USB
device
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select
which memory to use and then start
playback.
You cannot select a memory during
playback. Make sure to select a memory
before starting playback.
1
Connect the USB device to the
(USB) port.
2
Select "Settings" from the home
menu, then press ENTER.
3
Press / repeatedly to select "USB
Memory Select, " then press ENTER.
The setting screen appears.
4
Press / repeatedly to select a
memory number, then press ENTER.