Instructions For Continued Airworthiness, Code Of Federal Regulation Cfr 91.213 - Honeywell HS-700 Description And Installation Manual

High speed data system
Table of Contents

Advertisement

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
5. Instructions for Continued Airworthiness, Code of Federal Regulation
CFR 91.213
A. General
(1) Maintenance requirements and instructions for continued airworthiness of the
HS--700 HSU components are contained in the following paragraphs:
(2) Installation of the HSU on an aircraft by Supplemental Type Certificate or Form 337
obligates the aircraft operator to include the maintenance information provided by this
manual in the operator's Aircraft Maintenance Manual and the operator's Aircraft
Scheduled Maintenance Program.
B. Instructions
(1) Maintenance information for the HSU (system description, removal, installation,
testing, etc.) is contained in this manual.
(2) LRU part numbers and other necessary part numbers contained in this manual
should be placed into the aircraft operator's appropriate aircraft Illustrated Parts
Catalog (IPC).
(3) Wiring diagram information contained in this manual should be placed into the aircraft
operator's appropriate aircraft Wiring Diagram Manuals.
(4) The high speed data system components are considered on--condition units and no
additional maintenance is required other than a check for security and operation at
normal inspection intervals.
(5) If a system component is inoperative, remove unit, secure cables and wiring, collar
applicable switches and circuit breakers, and placard them inoperative. Revise
equipment list and weight and balance as applicable prior to flight and make a log
book entry that unit was removed. Refer to section 91.213 of the CFR or the aircraft's
minimum equipment list (MEL).
(6) The HSU components can be repaired only at a factory authorized repair center or an
appropriately rated FAA Part 145 repair station.
(7) Once repaired, reinstall the LRU in the aircraft in accordance with the original Form
337 approved data or instructions in this manual. Do a return--to--service test of the
system and approve it for return to service with a log book entry required by section
43.9 of the FAR.
(8) Scheduled Maintenance Program tasks to be added to the aircraft operator's
appropriate aircraft maintenance program are as follows:
(a) Recommended Periodic Scheduled Servicing Tasks:
(b) Recommended Periodic Inspections:
(c) Recommended Periodic Scheduled Preventative Maintenance Tests (Tests to
determine system condition and/or latent failures):
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
HS--700 High Speed Data System
23- -20- -33
None Required
None Required
None Required
Page 7--5
30 Aug 2002

Advertisement

Table of Contents
loading

Table of Contents