Ground Requirements; Figure 3-1. Electric Cable Chart - Honeywell HS-700 Description And Installation Manual

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
C. Ground Requirements
(1) General
(a) Proper grounding is a key factor in ensuring proper system operation under
normal conditions, high intensity radiated electromagnetic frequencies (HIRF),
and lightning environments. You must obey this section to satisfy these
requirements.
NOTE: HIRF and lightning requirements dictate that the shielded wires meet
the requirements of paragraph 2.C.(3). Installation of this system into
aircraft manufactured prior to the FAA requirements adheres to these
practices whenever feasible.
(2) Chassis Grounding
(a) All rack mount/remote mount units are electrically bonded to the airframe. This is
done by making sure the mating surfaces between the LRU mounting tray (or
LRU mounting feet if a tray is not used) provide a low impedance (< 0.1 Ω)
electrical path.
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
HS--700 High Speed Data System

Figure 3-1. Electric Cable Chart

23- -20- -33
Page 3--2
30 Aug 2002