Bsm (Blind Spot Monitor) - Lexus NX 300 Owner's Manual

292
4-5. Using the driving support systems
function (for static objects) is not stopped
(P.284), when the front or rear sensors
detect a static object and brake control is
performed, the clearance sonar buzzer also
sounds and a notification of the approxi-
mate distance to the static object is pro-
vided.
In the unlikely event that the Parking
■
Support Brake function (for static
objects) mistakenly operates at a cross-
ing or elsewhere
Even in the unlikely event that the Parking
Support Brake function (for static objects)
mistakenly operates at a crossing or else-
where, brake control is canceled after
approximately 2 seconds, allowing you to
proceed forward and leave the area. Fur-
thermore, brake control is also canceled
when the brake pedal is depressed.
Depressing the accelerator pedal again
allows you to proceed forward and leave
the area.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en

BSM (Blind Spot Monitor)

*
: If equipped
The Blind Spot Monitor uses the
sensors installed behind the rear
bumper. The system is intended to
assist the driver check areas that
are not easily visible. The system
has the following two functions:
 The Blind Spot Monitor function
Assists the driver in making the deci-
sion when changing lanes
 The Rear Cross Traffic Alert func-
tion
Assists the driver when backing up
These functions use the same sen-
sors.
*