284
4-5. Using the driving support systems
When the shift lever is mistakenly
■
in D and the vehicle moves forward
WARNING
For safe use
■
Do not rely solely upon the system. Rely-
ing solely upon the system may lead to an
unexpected accident.
●
Driving safely is the sole responsibility
of the driver. Pay careful attention to
the surrounding conditions in order to
ensure safe driving. The Parking Sup-
port Brake function (for static objects)
can provide support to lessen the
severity of collisions. However, it may
not operate depending on the situa-
tion.
●
The Parking Support Brake function
(for static objects) is not a system
designed to completely stop the vehi-
cle. Furthermore, even if the Parking
Support Brake function (for static
objects) is able to stop the vehicle,
brake control is canceled after
approximately 2 seconds, so depress
the brake pedal immediately.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
Sensor positions and types
Sensor positions and types
■
Front corner sensors
A
Front center sensors
B
Rear corner sensors
C
Rear center sensors
D
NOTICE
■
Preventing sensor malfunctions
If the area around a sensor is subjected
●
to an impact, equipment may not oper-
ate properly due to a sensor malfunc-
tion. Have the vehicle inspected by
your Lexus dealer.
When using a high-pressure washer to
●
wash the vehicle, do not spray water
directly on the sensors. The sensors
may not function properly if subjected
to an impact from strong water pres-
sure.
●
When using steam to wash the vehicle,
do not direct steam too close to the
sensors. The sensors may not function
properly if subjected to steam.
Changing settings of the Park-
ing Support Brake function (for
static objects)
This system can be enabled/disabled