Advertisement
Available languages
Available languages
INSTALLATION/CONNECTION
Wiring connection
Antenna terminal
DAB antenna jack ( 5)
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin
Color and function
A4 Yellow
: Battery
A5 Blue/White *
1
: Power control
A7 Red
: Ignition (ACC)
A8 Black
: Earth (ground) connection
B1 Purple ]
: Rear speaker (right)
B2 Purple/black [
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
B5 White ]
: Front speaker (left)
B6 White/black [
B7 Green ]
: Rear speaker (left)
B8 Green/black [
Rear/Subwoofer output
Fuse (10 A)
Ignition wire (Red)
Unit
Battery wire (Yellow)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
ISO
connectors
Автотовары «130»
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially available custom wiring
harness specific for your car and leave this job to professionals for your safety.
Consult your car audio dealer.
When connecting to an external amplifier,
connect its ground wire to the car's chassis to
avoid damaging the unit.
NOTE: Total output for Blue/White wire ( *
is 12 V
350mA.
If no connections are made, do not let the wire come
out from the tab.
Light blue/yellow
STEERING WHEEL
To the steering wheel
REMOTE INPUT
remote control adapter
(Steering remote
REMOTE CONT
control wire)
Blue/White *
2
To the power control
ANT CONT
terminal when using the
(Power control wire/
P. CONT
optional power amplifier
Antenna control wire)
or to the antenna control
terminal in the vehicle
Brown
To the terminal that
(Mute control wire)
MUTE
is grounded when the
telephone rings or during
conversation ( 15)
(To connect the Kenwood
navigation system, refer
your navigations manual.)
Part list for
installation
(A) Faceplate
1
) + ( *
2
)
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH
19
Advertisement
