Download Print this page

Kenwood KMM-DAB403 Instruction Manual page 18

Digital media receiver
Hide thumbs Also See for KMM-DAB403:

Advertisement

Available languages

Available languages

DISPLAY SETTINGS
Set the dimmer
Press and hold DISP (DIMMER) to turn on or off the dimmer.
• If you have set [DIMMER TIME], it will be canceled once you press and
hold this button.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
2
Repeat step
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
DISPLAY
DIMMER
Dim the illumination.
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00; [OFF]: 6:00)
BRIGHTNESS
0 to 31: Select your preferred brightness level for display illumination.
TEXT SCROLL
AUTO/ONCE: Select whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
TROUBLESHOOTING
Symptom
.
Default: XX
Автотовары «130»
Remedy
• Adjust the volume to the optimum level.
Sound cannot be heard.
• Check the cords and connections.
"MISWIRING CHECK WIRING
Turn the power off, then check to be sure the
THEN PWR ON" appears.
terminals of the speaker wires are insulated
properly. Turn the power on again.
"PROTECTING SEND SERVICE"
Send the unit to the nearest service center.
appears.
• Sound cannot be heard.
Clean the connectors. ( 15)
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
Reset the unit. ( 3)
DAB reception is poor.
Make sure [ON] is selected for [DAB ANT POWER].
( 4)
"DAB ANT ERR"
Check the DAB antenna. If a passive antenna
(without a booster) is used, set [DAB ANT POWER]
to [OFF]. ( 4)
• Press the volume knob to activate Soft-Link.
"RELATED SERV FOUND"
( 6)
• Press
• Radio reception is poor.
Connect the antenna firmly.
• Static noise while listening
to the radio.
to cancel.
ENGLISH
13

Advertisement

loading