Advertisement
Available languages
Available languages
TROUBLESHOOTING
Symptom
Remedy
"READING" keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not
This is caused by how the files are recorded.
correct.
• This unit can only display uppercase letters, numbers,
Correct characters are not
displayed (e.g. album
and a limited number of symbols.
• Depending on the display language you have selected
name).
( 4), some characters may not be displayed
correctly.
"NA FILE"
Make sure the media contains supported audio files.
( 15)
"READ ERROR"
Copy the files and folders onto the USB device again. If
this does not solve the problem, reset the USB device or
use another USB device.
"NO DEVICE"
Connect a USB device, and change the source to USB
again.
"COPY PRO"
A copy-protected file is played.
"NA DEVICE"
Connect a supported USB device, and check the
connections.
"NO MUSIC"
Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
14
ENGLISH
Symptom
• Sound cannot
be heard during
playback.
• Sound output only
from the Android
device.
Cannot playback at
[BROWSE MODE].
"NO DEVICE" or
"READING" keeps
flashing.
Playback is intermittent
or sound skips.
"ANDROID ERROR"/
"NA DEVICE"
Автотовары «130»
Remedy
• Reconnect the Android device.
• If in [HAND MODE], launch any media player application
on the Android device and start playback.
• If in [HAND MODE], relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. ( 15)
• Make sure KENWOOD MUSIC PLAY APP is installed on the
Android device. ( 9)
• Reconnect the Android device and select the appropriate
control mode.
• If this does not solve the problem, the connected Android
device does not support [BROWSE MODE]. ( 15)
• Switch off the developer options on the Android device.
• Reconnect the Android device.
• If this does not solve the problem, the connected Android
device does not support [BROWSE MODE]. ( 15)
Turn off the power saving mode on the Android device.
• Reconnect the Android device.
• Restart the Android device.
Advertisement
