Jacuzzi J-400 Series Installation Manual And Use & Maintenance page 61

characters will be display follow by dots ("...").
Audio Settings: Tap to access the audio submenu.
Volume: Displays the current volume level from 0 to
Vol: 30
30.
Back Button: Tap to go back to the previous menu.
Invert Button: Tap to invert the display image.
Connecting the BLUEWAVE® System with your Blue-
tooth® device.
To bridge a connection between the BLUEWAVE 2.0 Wireless Au-
dio System and your Bluetooth® device, follow the steps below.
Note: The BT icon cannot be selected manually unless a Blue-
tooth® connection is established with your device. If you expere-
ince a connection problem with your Bluetooth® device, make sure
that the Bluetooth® antenna is secure and located at the highest
point within the equipment bay.
- Tap the music icon on the control panel screen then touch the
power button located on the top right to turn on the stereo.
- From your Bluetooth® device, make sure that the Bluetooth®
setting is ON.
- Please see the instructions for linking up your device to the
"BLUEWAVE™" system and connect to it.
- Follow the pairing instructions for your Bluetooth® device and
connect the "BLUEWAVE™" device that appears on your screen.
- Once the connection is established, Bluetooth® "BT" icon on
the screen will be highlighted confirming the connection.
- If asked for a password, enter the password "0000" and then
connect.
- If connection is successful, "BLUEWAVE™" will show as "con-
nected" to your Bluetooth® device and the "BT" Bluetooth® icon
will light up).
Connecting an external device
1. Remove the front panel on the hot tub.
2. Find the Bluewave unit and connect the external device to the
cable labelled "AUX" (to do this, use a 3.5 mm cable, not sup-
plied).
3. Feed the cable towards the outside and refit the panel, taking
care not to damage the cable.
Be careful when handling the device (please see the usage warn-
ings).
Audio Settings Menu
To enter the Audio Settings Menu, tap
menu. The Audio Settings menu offers an enhanced audio expe-
rience by providing a custom or preset bass and treble settings.
to adjust the Bass range from -5 to 5.
side to adjust the Treble range from -5 to 5.
Rock Preset: Tap
"Rock" has a 1 Bass and 3 Treble preset setting. When not in use it
will be grayed out; if it is in use the button will be highlighted.
Classical Preset: Tap
dio setting. "Classical" has a 1 Bass and 1 Treble preset setting.
When not in use it will be grayed out; if it is in use the button
will be highlighted.
Pop Preset: Tap
"Pop" has a -1 Bass and -2 Treble preset setting. When not in use it
will be grayed out; if it is in use the button will be highlighted.
The Clearray function (water purification system) can be activa-
ted by pressing (
choose how long you want Clearray to be active for (
two hours/ three hours/ OFF). During this time the circulation
pump and the CLEARRAY unit are on. The button will have a blue
inner glow when this feature is on.
Note: When the CLEARRAY system is on due to a programmed or
scheduled setting the feature cannot be turned off.
Adjusting Jet Flow
The water flow to certain jets in your spa can be increased or
decreased by rotating the outside jet face.
Note: Always keep at least 6 adjustable jets open at all times.
Adjusting PowerPro™ MX2 Jets
from the Music sub-
61
MUSIC
Track Name
Vol: 30
Bass
Bass Adjustment: Slide from side to side
Treble
Treble Adjustment: Slide from side to
to activate the "Rock" music audio setting.
rock
to activate the "Classical" music au-
classical
pop to activate the "Pop" music audio setting.
Back Button: Tap to go back to the previous menu.
Invert Button: Tap to invert the display image.
CLEARRAY on Demand
); by pressing this icon repeatedly you can
Audio +
Bass
Treble
rock pop classical
one hour/