Nokia Customer Care
Safety Information
Adhere to the following guidelines when assembling and disassembling the
mobile terminals.
QUALIFIED SERVICE
Only qualified personnel may install or repair mobile terminal equipment.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect
incompatible products.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user's guide for detailed
safety instructions. Do not connect incompatible products
ESD Protection
Always follow ESD protection guidelines when disassembling and assembling
the mobile terminal. To avoid potential ESD damage, the recommendation is
to treat all assemblies and components as if they are sensitive to ESD.
(1) All Surface Mounted components must be handled as electrostatic
sensitive components.
(2) Prevent static discharge failures to all semiconductors and modules
containing ESD sensitive components by using appropriate ESD protective
equipment.
(3) Do not touch the component with bare hands, and always wear a
grounded wrist strap or footwear.
(4) A mobile terminal that is ready for use can be handled normally without
ESD protection. The battery can be replaced in normal conditions of use.
(5) All ESD-sensitive parts must be packed in metallized protective bags
during shipping and handling outside any ESD Protected Area (EPA).
Be especially careful to avoid contaminating the mobile terminal with any dust
during assembly.
Issue 1 06/2006
© 2006 Nokia Corporation
Disassembly/Assembly
Company Confidential
6088 (RM-218)
Page 3