Download
Share
Print this page
Innova XTIRPA IN-8020 Instruction And Safety Manual
  1. Manuals
  2. Brands
  3. Innova Manuals
  4. Industrial Equipment
  5. XTIRPA IN-8020
  6. Instruction and safety manual

Innova XTIRPA IN-8020 Instruction And Safety Manual

Universal rescue system
Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTION AND SAFETY MANUAL FOR
XTIRPA XLT MAST SYSTEM/DAVIT ARM XTIRPA XLT
4.6 M (15 FT) TO 7.6 M (25 FT) X 1.83 M (6 FT) FOR PPE
UNIVERSAL RESCUE SYSTEM
IN-8020
MUST BE READ AND UNDERSTOOD BY THE USER BEFORE EACH USE
Innova Public Utility Products, Inc.
1040 Boulevard Industriel, Granby, Québec, Canada
Tel (450) 777-1240 Fax (450) 372-9936 www.xtirpa.com
MU8002-002ENG rev01

Advertisement

loading
Need help?

Need help?

Do you have a question about the XTIRPA IN-8020 and is the answer not in the manual?

Questions and answers

Related Manuals for Innova XTIRPA IN-8020

Summary of Contents for Innova XTIRPA IN-8020

  • Page 1 4.6 M (15 FT) TO 7.6 M (25 FT) X 1.83 M (6 FT) FOR PPE UNIVERSAL RESCUE SYSTEM IN-8020 MUST BE READ AND UNDERSTOOD BY THE USER BEFORE EACH USE Innova Public Utility Products, Inc. 1040 Boulevard Industriel, Granby, Québec, Canada Tel (450) 777-1240 Fax (450) 372-9936 www.xtirpa.com MU8002-002ENG rev01...
  • Page 2 EC DECLARATION OF CONFORMITY (English) Manufacturer established in the community: Produits de Services Publics INNOVA inc., 1040, boul. Industriel, Granby, Québec, Canada J2J 1A4 Declares that the following PPE product: IN-8020 XTIRPA XLT Mast-DavitArm 4.6M (15ft) to 7.6M (25ft) X 1.83 M (6 PI) for EPI.
  • Page 3 INTRODUCTION CAUTION The XTIRPA system is part of a personal protection equipment system with fall protection, and offers a solution for the entry, rescue and positioning of personel and goods in isolation. The user must read, understand and follow the manual’s instructions for each of the entire XTIRPA system’s components and parts.
  • Page 4 12 and IN-5040 (counterweight base), A5039-16 (individual counterweight) in compliance with document number MU8020-002ENG rev02. APAVE SUDEUROPE SAS, Headquarters: 8 rue Jean-Jacques Vernazza - ZAC Saumaty- Séon-CS 60193 - 13322 MARSEILLE CEDEX 16, is the notified body concerned by the design phase and the notified body concerned by the control phase from production.
  • Page 5 RESTRICTIONS a) CAPACITY: This product’s maximum weight capacity is 360 lbs (164 kg). Per (OSHA, CSA). b) The manufacturer confirms that the anchoring devices have been subjected to tests in accordance with the current European standard (EN 795: 2012 Type A, Type B and Type E and regulation 2016/425) and that, unless otherwise indicated, they are suitable for use by one person only with a shock absorber compliant with EN 355.
  • Page 6 is in the correct position at all times. The partner must also ensure that the XTIRPA system is firmly in place and that no imbalance of the load is possible. IMPORTANT: During installation of the system, it is important to ensure its stability. h) Only use a full-body harness compliant with EN 361 as well as certified cables and lifelines for every user of the XTIRPA system, which meet the appropriate specifications, designed and recommended for use in specialized working conditions, such as those for which the...
  • Page 7 If you have questions related to the use, maintenance or suitability of the XTIRPA system for your operations, please contact the manufacturer, PSP INNOVA INC. CAUTION: To ensure safety during the use of the fall arrest system, it is essential to make sure that there is enough clearance below the user, so as to avoid any injury.
  • Page 8 IMPORTANT: If you have any questions related to the use, maintenance or suitability of the XTIRPA system for your operations, please contact the manufacturer, PSP INNOVA INC. IMPORTANT: Enter the product’s ID number indicated on the ID label on the maintenance and inspection sheet contained in this Instruction and Safety Manual.
  • Page 9 f) Any person who has not read the Instruction and Safety Manual, who has not been trained to use the XTIRPA system and who does not understand all operation and safety instructions is not qualified to use the XTIRPA system. Any user who has not undergone training exposes others and themselves to serious injury or death, for which the manufacturer refuses any warranty or responsibility, the user, owner and buyer of the XTIRPA system waiving any arising claim, right and remedy against the manufacturer.
  • Page 10 MAINTENANCE/REPAIRS/STORAGE a) Before each use, the user must read, understand and follow the manufacturer’s Instruction and Safety Manual. Ensure that markings are visible at all times. b) Before each use, carefully inspect the XTIRPA system, as well as all of its components and parts.

  • Page 11: Warranty

    WARRANTY The XTIRPA system, offered by the Manufacturer, PSP INNOVA INC. is warranted against all defects in material and workmanship for a (2) two-year period from the date of purchase, this warranty only applies to the XTIRPA system’s initial buyer. The Manufacturer shall promptly repair or replace all components or parts deemed faulty.
  • Page 12 DESCRIPTION OF THE XTIRPA SYSTEM CAUTION The XTIRPA system is part of a personal protection equipment system with fall protection, and offers a solution for the entry, rescue and positioning of personel and goods in isolation. The XTIRPA system was engineered to act as a supporting or anchoring structure for these uses.
  • Page 13 IMPORTANT: If you have any questions related to the use, maintenance or suitability of the XTIRPA system for your operations, please contact the manufacturer, PSP INNOVA INC. IMPORTANT: Enter the product’s ID number indicated on the XTIRPA System’s ID label on the maintenance and inspection sheet contained in this Instruction and Safety Manual.
  • Page 14 Install the floor adapter base in the desired location; A) Edge position. B) Central position. Check that the winch support is installed. If necessary, install the winch support on the mast system/davit using the four (4) nuts and bolts. With the help of the available lifting equipment, lift the mast system/davit using the two (2) lifting points provided for this purpose on the mast/davit.
  • Page 15 XTIRPA system on soft ground, such as, but not limited to, sand, grass, gravel and pebbles. If you have any questions related to the use, maintenance or suitability of the XTIRPA system for your operations, please contact the manufacturer, PSP INNOVA INC. Level the base of the XTIRPA XLT mast/adjustable davit using the base’s integrated level.
  • Page 16 INSTALLATION OF TYPE 3 SELF-RETRACTING LIFELINE ON THE XTIRPA XLT SYSTEM Install the lifeline or winch onto the davit arm bracket designed to accept this type of equipment. Use the locking pin provided with the lifeline or winch bracket and lock with the pin. CAUTION: It should be noted that only plates, supports and adaptors certified, approved and recommended by the Manufacturer may be used.
  • Page 17 If you have any questions related to the use, maintenance or suitability of the XTIRPA system for your operations, please contact the manufacturer, PSP INNOVA INC. INSTALLATION OF A 2ND TYPE 3 SELF-RETRACTING LIFELINE ON THE XTIRPA XLT SYSTEM Install the 2nd winch support on the mast system/davit below the main support, using the four (4) nuts and bolts.
  • Page 18 Pull on the lifeline cable or winch leading to the next pulley, situated on the upper edge of the mast/davit, then remove the pulley pin in order to thread the cable through. Once the cable has been threaded through, replace the pin to secure the lifeline or winch cable.
  • Page 19 When the mast/davit has been adjusted to the desired height, raise the handle of the locking mechanism. Place the pin back into the locking mechanism in order to secure it. ADJUSTMENT OF THE DIRECTION OF THE XTIRPA XLT SYSTEM To turn the XTIRPA XLT system in the desired direction, start by removing the pin from the handling arm.
  • Page 20 Raise the handling arm when the desired direction of the XTIRPA XLT has been reached. Replace the pin in the handling arm. IMPORTANT: Ensure that the cable or lifeline is positioned directly above the working area. Only use cables or lifelines that are certified and in perfect working order, meeting the appropriate specifications, including the maximum lifting capacity for the XTIRPA system’s intended use.
  • Page 21 IMPORTANT: If necessary, use guardrails to secure the work space and avoid any falls. CAUTION: The Instruction and Safety Manual must be followed to ensure the appropriate use and maintenance of this product. Any modification or misuse of the XTIRPA system or any of its components or parts, or any failure to follow the manual’s instructions may lead to serious injury or death, for which the manufacturer refuses any warranty or responsibility, the user, owner and buyer of the XTIRPA system waiving any arising claim, right and...

  • Page 22: Information And Safety Labels

    ...: 894 lb (406 kg) (A5039-16) Complete system........: 8453 lb (3834 kg) Manufacturing date 1 MAX Manufacturing batch number Products Manufactured By: Innova Public Utility Products Inc. 1040 Boul.Industriel, Granby, QC, Canada J2J 1A4 www.xtirpa.com S5039-002-RevB Made in Canada MU8002-002ENG rev01...
  • Page 23 CALCULATION DIAGRAM Ground Clearance: Length of the lanyard carabiner Extended length of the absorber Distance between harness buckle and feet = 4.9’ (1.5 m) Minimum safe distance = 3.3’ (1 m) Pay attention to the distance to the ground! MU8002-002ENG rev01...
  • Page 24 Zone de travail Work area MU8002-002ENG rev01...
  • Page 25 MU8002-002ENG rev01...
  • Page 26 MU8002-002ENG rev01...
  • Page 27 NOTES MU8002-002ENG rev01...
  • Page 28 NOTES MU8002-002ENG rev01...
  • Page 29 NOTES MU8002-002ENG rev01...
  • Page 31 CONFINED SPACE SAFETY SOLUTIONS Headquarters and manufacturing plant Innova Public Utility Products, Inc., 1040, Boulevard Industriel Canada, Qc, Canada J2J 1A4 Telephone: 450.777.1240 Freephone: 1.800.461.1937 Xtirpa is a registered trademark of Innova Public Utility Products, Inc., www.xtirpa.com licensed for use in Canada...