Advertisement
Figure 2. Example of 830, 840, 870, 890, SB2, SB3, 5079 Card Latches
__ 11. Remove the card filler plate.
__ 12. Attention: Adapter cards are fragile:
__ 13. Align the new adapter card with the card holders inside the system unit
__ 14. Swing the black latch in and move the other latch clockwise, or install the
__ 15. Go to "Connecting the Twinaxial cable attachment and Twinaxial console
Connecting the Twinaxial cable attachment and Twinaxial console
cable
__ 1. Find the 8-port Twinaxial cable attachment (part number 21F5093) and label
__ 2. Connect the 8-port Twinaxial cable attachment to the connector on the 2746
v Handle only by the edges
v Keep fingers off printed circuit area
v Use static strap when handling
v Leave in protective packaging until ready to install
and push until it is connected securely.
screw to secure the card.
cable".
the cable, for example, C06.
card.
Note: Each port on the 8-port attachment cable supports seven devices that
allow for 56 attached devices, of which only 40 can be active.
Upgrade Operations Console to twinaxial console
5
Advertisement
