Advertisement
Completing the Installation
__ 1. Power on the PC or workstation that is your system unit console.
__ 2. Is your system unit a 270/810 or 820/825?
__ 3. Look at the Function/Data display on the control panel.
__ 4. Does 01 B M V=S appear in the Function/Data display?
__ 5. Look at the Function/Data display on the control panel.
__ 6. Does 01 B V=S appear in the Function/Data display and is the manual
__
270 or 810: Continue with the next step.
__
820, 825, 830, 840, SB2, SB3, 870 or 890: Go to step 5.
__
Yes: Go to step 7 on page 8.
__
No: Do the following:
__ a. Press the Increment/Decrement push button until 02 appears
in the Function/Data display.
__ b. Press the Enter push button on the control panel.
__ c. Press the Increment/Decrement push button until B appears in
the Function/Data display.
__ d. Press the Enter push button on the control panel.
__ e. Press the Increment/Decrement push button until M appears in
the Function/Data display.
__ f. Press the Enter push button on the control panel.
__ g. Press the Increment/Decrement push button until S appears in
the Function/Data display.
__ h. Press the Enter push button on the control panel.
__ i. Press the Increment/Decrement push button until 01 appears
in the Function/Data display.
__ j. Press the Enter push button on the control panel.
01 B M S should appear in the Function/Data display. If it does
not, repeat steps 4a through 4i.
__ k. Go to step 7 on page 8.
mode indicator (a small hand) illuminated?
__
Yes: Continue with the next step.
__
No: Do the following:
__ a. Press the Mode Select button until the Manual mode indicator
(a small hand) is illuminated.
__ b. Press the Increment/Decrement push button until 02 appears
in the Function/Data display.
__ c. Press the Enter push button on the control panel.
__ d. Press the Increment/Decrement push button until B appears in
the Function/Data display.
__ e. Press the Enter push button on the control panel.
__ f. Press the Increment/Decrement push button until S appears in
the Function/Data display
__ g. Press the Enter push button on the control panel.
__ h. Press the Increment/Decrement push button until 01 appears
in the Function/Data display.
__ i. Press the Enter push button on the control panel.
Upgrade Operations Console to twinaxial console
7
Advertisement
