Advertisement
__ 7. Press the system unit power-on button. The power-on light will appear.
__ 8. Select Use Dedicated Service Tools (DST) from the IPL or Install the System
__ 9. Type your service tools user ID and service tools password on the
__ 10. Select Work with DST Environment from the Use Dedicated Service Tools
__ 11. Select System devices from the Work with DST Environment display.
__ 12. Select Console mode from the Work with System Devices display.
__ 13. Select Twinaxial from the Select Console Type display.
__ 14. Press F3 (Exit) once.
__ 15. Select Perform an IPL from the Use Dedicated Service Tools (DST) display.
__ 16. Sign on the system unit. Ensure you have service tools authority.
__ 17. Type strsst on the command line of the Main Menu.
__ 18. Select Start a service tool from the System Service Tools (SST) display.
__ 19. Select Hardware service manager from the Start a Service Tool display. Press
__ 20. Select Packaging hardware resources (system, frames, cards...) from the
__ 21. Type 9 on the System Unit line.
__ 22. Press Page Down if needed and look at the Card Pos column.
__ 23. Verify that the cards you installed or moved appears in the position you
__ 24. Your feature upgrade is complete.
__ 25. Press F3 three times and press Enter to get back to the Main Menu.
8
Upgrading the System Unit from Operations Console to Twinaxial Console (5540) V5R2
01 B S should appear in the Function/Display panel and the
manual mode indicator (a small hand) is illuminated. If it does
not appear, repeat steps 6a on page 7 through 6h on page 7.
__ j. Go to step 7.
Note: When the power on and IPL is complete, the IPL or Install the System
display should appear on your system unit console.
display.
Press Enter.
Dedicated Service Tools (DST) Sign On display.
Press Enter.
(DST) display.
Press Enter.
Press Enter.
Press Enter.
Press Enter.
Press Enter.
Press Enter.
Press Enter.
Enter.
Hardware Service Manager display. Press Enter.
installed them.
Advertisement
