5.
Remove the Z Seal.
Z Seal
6.
Pull out the Reset PI on the LF-2091 Flexible Board.
7.
Remove LF-2091 Flexible Board from the boss of the Rear Tube Mirror Block Assy.
8.
Disconnect the F Flexible Board from the connector of the LF-2091 Flexible Board.
LF-2091 Flexible Board
Connector
Stationary Tube
9.
Remove the LF-2091 Flexible Board from the hook of the Rear Tube Mirror Block Assy.
DSC-RX100M4
Boss
Boss
F Flexible Board
Hook
4-26