Advertisement
Available languages
Available languages
9" (229 mm)
Max
21"
(533 mm)
3-1/8"
(79 mm)
3-1/2"
(89 mm)
Product Information
Applicable product:
Drop-in rim style, custom pump, heater
Fixture*:
Bathing well:
Basin area, bottom
43" (1092 mm) x 21-9/16" (548 mm)
Basin area, top
53-1/2" (1359 mm) x 32-1/8" (816 mm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15" (381 mm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
Pump: 1-speed
Heater: 1.5 kW
Minimum access panel
pump/control (required):
Included components:
Cut-out template
1191346-1-A
Pump/Control Access
10-13/16"
(275 mm)
60" (1524 mm)
3/8" (10 mm)
2-7/8"
3" (76 mm)
(73 mm)
K-1162-S1HB
V
Hz
A
120
60
7.5
120
60
12.5
20" (508 mm) W x
15" (381 mm) H
1042556-7
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
20"
18-1/2"
(508 mm)
(470 mm)
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (610
mm) of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
35 lbs/square foot (171 kg/square meter) loading.
The pump must be relocated to the custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
2
1-1/2"
(38 mm)
Drop-In Rim Detail
42" (1067 mm)
Ø 1-1/2"
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.
Advertisement
