Follow these steps to install the LabelWriter printer and print your first label.
1. Unpacking your LabelWriter Printer
Do not plug the printer into your computer until after the software installation
NOTE
is complete.
Unpack your printer and save the packing materials.
1
Make sure you have all the items shown in Figure 1. (Labels included in the package
2
may vary.)
Cleaning card
USB cable
Roll of DYMO Stamps
labels (LW 450 Turbo only)
CD-ROM
LabelWriter printer
Roll of Address labels
Figure 1
Quick Start Guide
Quick Start Guide
LabelWriter
Quick Start
Power adapter
Power cord
1