Optional Flash Memory Card; Figure 7. I/O Cable Overview - RD Instruments WorkHorse User Manual

WorkHorse Mariner ADCP User's Guide
A
P1
A
ADCP_TXDB1 (RS-232 OUT/CH A RS-485B/RS-422 OUT B (-))
ADCP_TXDA1 (RS-232 IN/CH A RS-485A/RS-422 OUT A (+))
View A - A
J1 Wire Side
Scale: None
Figure 7.
3.5

Optional Flash Memory Card

Memory cards are not included with the Mariner ADCP. Two PCMCIA
memory card slots (see
ory capacity not to exceed 2GB. The PC Card recorder is located on the
Digital Signal Processor (DSP) board inside the Workhorse's electronics.
To recover data, the card can be removed and used in a personal computer
(PC), or left in the Workhorse, and accessed by using WinSC (see the
WinSC and PlanADCP User's
NOTE. The WorkHorse Mariner does not come with flash memory, but
has the same capacity as a WorkHorse Sentinel.
NOTE. WinSC is not provided with WorkHorse Mariner systems, but is
available for free download at www.rdinstruments.com.
page 10
ADCP_RXDB1 (CH B RS-485 B/RS-422 IN B (-))
ADCP_RXDA1 (CH B RS-485 A/RS-422 IN A (+))
ADCP_DATACOM (COMMUNICATION RETURN)
ADCP +VDC (POWER +)
ADCP -VDC (POWER -)
I/O Cable Overview
Figure 5, page
Guide).
P1
L
W
M
X
N
E
G
8) are available, with the total mem-
P2
P2
BRN
6
BLU
5
WHT
2
BLK
1
GRN
4
RED
3
YEL
7
RD Instruments