Configuration - PEP Modular Computers CP341 Manual

CP341

2. Configuration

The CP341 accords fully with the plug & play philosophy. Since it uses a standard Win-
dows NT driver It does not need any jumpers and, therefore, does not require configura-
tion. A complete set of drivers is located on the PEP Modular Computers "Drivers" disk
supplied with the CP341.
Simply insert the cable terminal into the CP341 Ethernet/Fast Ethernet RJ-45 socket,
run the automatic configuration software, install the network drivers and — it's ready!
$ $
Important!
Useful hints on driver installation and configuration of the CP341
board via software as well as the relevant troubleshooting options
are provided in Chapter 3 of this manual.
ID 18845, Rev. 0102 ® PEP Modular Computers GmbH
Configuration
Page 2 - 3