CP341
•
Digital I/O
•
Analog I/O
Self-Testing
A special PEP self-testing board provides a trouble-spotting capability within your PEP
system.
System Hardware
The PEP CompactPCI system hardware includes housings, storage devices, power
supply units, network adapters etc. The most important system hardware elements with
which to configure your CompactPCI system are as follows:
Multiprocessor
In a CompactPCI multi-processer system, a system controller (CP610) communicates
with other CPU's through a non-transparent PCI / PCI bridge
Housings
•
Board cages for 19-inch or wall mounting
•
PCI tower
•
PCI desktop housing
Mass Storage Devices
•
Hard-disk drive
•
Floppy-disk drive
•
CD-ROM drive
Power Supply Units
•
19-inch "M", 180 W, 120/230 V AC, 3.3V/14A, 5.1V/20A, 12V/2A, -12V/1A
•
"ATX", 235 W, 120/230 VAC, 3.3V/14A, 5V/22A, 12V/8A,-12V/1A, -5V/0.5A,
5VSB/0.1A
Please note that the following units of measurement are used to express the dimensions
of PEP cards and housings:
•
Height: 1 U = 44.45 mm
•
Width: 1 HP = 5.08 mm
For a detailed description of the PEP Modular Computers CompactPCI modules please
consult the specific components' manuals or data sheets.
PEP Advantage
As the PEP Modular Computers CompactPCI system provides
comprehensive open solutions, new features and functionalities
may be added to our range. To keep abreast of the latest develop-
ments, please contact your local PEP Sales Office or visit the
Web Site.
ID 18845, Rev. 0102
® PEP Modular Computers GmbH
Introduction
PEP
Page 1 - 5