Preparation - Toto WASHLET SW2043R Instruction Manual

Preparation

1.Insert the battery
1
Remove the remote control
from the hanger.
Remote control
Hanger
2
Open the battery cover and
insert two AA batteries.
Close
Open
Battery cover
●When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
● The display goes out when no button on the
remote control is pressed for 5 minute or more.
3
Mount the remote control in
the hanger.
■ About the batteries
 Use dry cell, alkaline batteries.
 Be sure to follow "Safety Precautions" to prevent
the batteries from rupturing or leaking fluid, etc.
(Pages 7, 8)
14
Using the Product for the First Time
If the remote control is secured
(for anti theft)
1
Remove the screw from the
remote control fi xture.
(View from side)
Remote control
Wall
Hanger
Screw
Phillips screwdriver
2
Remove the remote control
from the hanger.
■ To secure the remote control again
Tighten the screw.
(Overtightening may cause damage to parts
such as the hanger)
2.Turn on the power
1
Insert the power plug.
 The wand extends and then retracts.
2
Check that the POWER LED
on the main display is lit up.
Lit
3.Open the shutoff valve
1
Fully open the shutoff valve.
Shutoff
valve
1 15