Wand; Water Filter Drain Valve - Toto WASHLET SW2043R Instruction Manual

Maintenance

Wand

Water fi lter drain valve
30
Wand
(Approximately once a month)
<If you notice dirt (Wand cleaning) >
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
Extend the wand.
1
 Operate with the buttons on the back side of the
remote control.
(1) Press [MENU].
(2) Use to select "CLEANING".
Press [ENTER].
Use
to select "WAND CLEANING
(3)
MODE ON/OFF".
Press [ENTER].
 The wand extends and water sprays out for cleaning.
 The wand automatically retracts after about 5 minutes.
2 Wipe with a soft, wet cloth.
Do not pull, push or press the wand with excessive
force. (May cause damage or malfunction.)
Press [STOP] on the front side of
3
the remote control.
 The wand retracts.
Water fi lter drain valve
<If you think the water pressure has weakened>
Close the shutoff valve.
1
 The water supply stops.
CAUTION
Do not remove the water fi lter drain
valve while the shutoff valve is open.
(Otherwise, water may leak out)
Extend the wand.
2
 Operate with the buttons on the back side
of the remote control.
(1) Press [MENU].
(2) Use to select "CLEANING".
Press [ENTER].
Use
to select "WAND
(3)
CLEANING MODE ON/OFF".
Press [ENTER] to extend the
wand.
Press [ENTER] again to retract
the wand.
(Release the pressure from the
water supply pipe.)
Unplug the power plug.
3
(Approximately once every 6 months)
Remove the cover and water
4
fi lter drain valve.
 Loosen the water fi lter drain valve with a
fl at-head screwdriver and then pull it.
Cover

Water Filter Drain Valve

Clean with a tool such as a
5
toothbrush.
 Also, remove any dust from inside the hole
of the water fi lter drain valve.
6 Reinstall the water fi lter drain
valve and cover.
 Insert the water fi lter drain valve and tighten
it securely with a fl at-head screwdriver.
Insert the power plug.
7
 The POWER LED lights up.
Open the shutoff valve.
8
31 31