ELSA MicroLink ISDN PCI User Manual page 43

AT + MSN = (Phone number for incoming calls to the Ser-
ver) + CPN = (Phone number for outgoing calls of the
modem) + P = HDLC + F = SYNC
Setting up the Client
Following software and hardware components must be installed for your computer to
operate as a client:
Microsoft Dial Up Network (Control Panel, Software, Windows Setup, Connections)
client for Microsoft networks (Control Panel, Network)
the same network protocol as the server (Control Panel, Network)
You will need the computer name of the server to make the connection from the cli-
ent to the server. To find out this name, click Start
Network Identification on the server.
To access the server from another computer, you first have to establish a connection to
the server within the Dial-Up Networking.
Double-click on Make New Connection in Dial-Up Networking. Enter a name for
the connection and select the first ISDN line for the connection. In the following
Workshop
Settings Control Panel
ELSA MicroLink ISDN PCI
37