Changing The Display - Sony HT-DDW960 Operating Instructions Manual

Tuning to preset stations
1
Press TUNER FM/AM repeatedly to
select the FM or AM band.
The last received station is tuned in.
2
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Each time you press the button, you can
select the preset station as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
Using the remote
1
Press TUNER repeatedly to select the FM or
AM band.
2
Press PRESET/CH/D.SKIP +/– repeatedly
to select the preset station you want
To select the preset station
directly
Press the numeric buttons on the remote.
The preset station of the selected number in the
current memory page is tuned in. Press SHIFT
repeatedly on the remote to change the memory
page.
US
24

Changing the display

Changing the information in
the display
You can check the sound field etc. by changing
the information in the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will
change cyclically as follows.
Index name of the input
Sound field currently applied
When the tuner is selected
Preset station name
Sound field currently applied
* Index name appears only when you have assigned
one to the input or preset station (page 35). Index
name does not appear when only blank spaces have
.
been entered, or it is the same as the input name.
Adjusting the brightness of
the display
Press DIMMER repeatedly.
The brightness of the display will change in 3
steps.
*
t Selected input t
*
t Frequency t